Chi tiết sản phẩm

SPS/A(B)-1811/2211

Giá bán : Call
Thuộc loại : MÁY MAY LẬP TRÌNH
Đời máy :
Ngày đăng : 13-01-2024
Lượt xem : 4125 lần.
Calaloge sản phẩm

Thông tin chi tiết sản phẩm
Video clip

SPS/A(B)-1811/2211

Máy lập trình khổ 18x11cm, 22x11cm SUNSTAR

Thông số kỹ thuật:

■ SPS/A(B)-1811/2211G(H)P-20

The maximum feed frame raising amount is 30 MM and maximum presser foot raising amount is 20MM; so, any type of heavy weighted fabric can be easily fed.

■ SPS/A(B)-1811/2211G(H)P-21

The amount of feed frame lowering is divided into two steps to result in the convenient fine location setting. The mid frame holding position is simply adjusted by turning a dialing nut.

■ SPS/A(B)-1811/2211G(H)P-22

Since the feed frame is detached and separated from side to side, the right and left frames are differently controlled in terms of the raising amount and speed; it shows excellent sewing result for the sewing project with unbalanced right and left frames.


Division	SPS/A(B)-1811/2211H	SPS/A(B)-1811/2211G

Usage	heavy	Ordinary

Sewing domain(X,Y)	220 mm x 110 mm

Sewing range	Maximum 2,000 spm ( Stitch width 3mm )

Stitch width	0,1 ~ 12.7 mm

Needle used	DP x 17 # 18	DP x 5 # 14

Hook	Double shuttle hook

Pressing lever increase	Maximum 30 mm ( Air : Maximum 30 mm )

Presser foot increase	Maximum 20 mm

Presser foot strok	4 mm ( 0 ~ 7 mm )

Thread Trimmer	Basic Offer

Wiper	Basic Offer ( Electronically Wiper )

Emergency Stop	Basic Offer

Memory	3.5" FDD (2HD)

No. of inputable pattern	Maximum 691 Pattern

No. of inputable needle	Maximum 360,000 neelde

reduced/enlarged ratio	1 ~ 400% ( 0.1% STEP )

Main-pivot driving motor	SPS/B Series : 500W Direct AC Servo motor

	SPS/B Series : 500W AC Servo motor

Feed system	Feed by stepping pulse motor

Electricity	Single phase 110V ~ 240V, Three phase 200V ~ 440V, 50/60Hz

Air pressure	0.49 Mpa